August: M.V.S. Most Valuable Slime
Please Gather:
Step 2: Empty the entire bottle of Elmer’s school glue into the bowl.
Step 3: (Optional) Add 2-3 drops of the mint chocolate scent scent.
Step 4: Add the blue pigment. The more you add the darker the color will be.
Step 5: Stir together. Give it a good 30+ seconds of mixing before moving on to the next step.
Step 6: Add 1 teaspoon of the dry SnoWonder. Mix very thoroughly for about 1-2 minutes to ensure the snow is fully mixed and absorbed into the glue.
Step 7: Add 4 teaspoons of lotion.
Step 8: Stir together. Give it a good 30+ (at least) seconds of mixing before moving on to the next step.
Step 9: Add 1 teaspoon of activator.
Step 10: Mix THOROUGHLY! It may take up to a minute to do this properly. It is super important to add the activator in this way, little by little, to achieve the best results.
Step 11: Add 1 more teaspoon of activator.
Step 12: Mix THOROUGHLY! AGAIN! It may take up to a minute to do this properly.
Step 13: Use 1 finger to test the slime and see if it is sticky.
Step 14: If it sticks to you, add another 1/2 teaspoon of activator and mix again! At this point, the slime may look stringy and/or clumpy. That's okay! Trust the process and keep stirring as vigorously as possible. It may feel like it takes a while to fully incorporate, but stick with it!
Step 15: Repeat steps 13-14 until the slime is no longer sticky. Do not add too much activator, otherwise your slime will become hard. You want the slime to be soft and stretchy, but not sticky.
Step 16: Add the rest of the SnoWonder packet into your second mixing bowl.
Step 17: Add 3/4 Cup of water into the bowl. Watch as the snow magically grows and expands!
Step 18: Add 1/2 of the wet snow from the bowl into your slime, and mix with your hands until it is fully incorporated into your slime.
Step 19: Mix THOROUGHLY! It may take up to a minute or two to do this properly. The snow needs to be fully mixed into the slime to ensure it has the right cloudy texture.
Step 20: Now you have cloud slime! Pull and stretch the slime. It should be light, fluffy, and drizzly.
Step 21: If the slime is not as light, fluffy, and drizzly as you’d like, add 1 TSP of the wet snow and mix thoroughly into your slime. Repeat this process until it reaches your desired texture.
Step 22: Don’t forget to name your slime! Write your slime’s name on the blank label on the side of your slime jar.
Step 23: Store your slime in the provided 8 oz jar. Always keep your slime in an air-tight container when you’re not playing with it so it can last as long as possible.
Step 24: Store any extra snow in an airtight container or bag. Save and use it for your next slimey creation!
Step 25: Decorate with the provided bingsu beads and charms!
Enjoy!
xoxo
The Sloomoos
- 4 oz Elmer’s school glue
- Blue colorant
- Mint chocolate scent
- Empty 8oz jar with blank side label
- SnoWonder packet
- Sports themed bingsu & charm pack
- Lotion (any kind, unscented)
- 2 Mixing Bowls
- Spoon Or Spatula
- Teaspoon Measuring Spoon
- Activator bottles
Step 2: Empty the entire bottle of Elmer’s school glue into the bowl.
Step 3: (Optional) Add 2-3 drops of the mint chocolate scent scent.
Step 4: Add the blue pigment. The more you add the darker the color will be.
Step 5: Stir together. Give it a good 30+ seconds of mixing before moving on to the next step.
Step 6: Add 1 teaspoon of the dry SnoWonder. Mix very thoroughly for about 1-2 minutes to ensure the snow is fully mixed and absorbed into the glue.
Step 7: Add 4 teaspoons of lotion.
Step 8: Stir together. Give it a good 30+ (at least) seconds of mixing before moving on to the next step.
Step 9: Add 1 teaspoon of activator.
Step 10: Mix THOROUGHLY! It may take up to a minute to do this properly. It is super important to add the activator in this way, little by little, to achieve the best results.
Step 11: Add 1 more teaspoon of activator.
Step 12: Mix THOROUGHLY! AGAIN! It may take up to a minute to do this properly.
Step 13: Use 1 finger to test the slime and see if it is sticky.
Step 14: If it sticks to you, add another 1/2 teaspoon of activator and mix again! At this point, the slime may look stringy and/or clumpy. That's okay! Trust the process and keep stirring as vigorously as possible. It may feel like it takes a while to fully incorporate, but stick with it!
Step 15: Repeat steps 13-14 until the slime is no longer sticky. Do not add too much activator, otherwise your slime will become hard. You want the slime to be soft and stretchy, but not sticky.
Step 16: Add the rest of the SnoWonder packet into your second mixing bowl.
Step 17: Add 3/4 Cup of water into the bowl. Watch as the snow magically grows and expands!
Step 18: Add 1/2 of the wet snow from the bowl into your slime, and mix with your hands until it is fully incorporated into your slime.
Step 19: Mix THOROUGHLY! It may take up to a minute or two to do this properly. The snow needs to be fully mixed into the slime to ensure it has the right cloudy texture.
Step 20: Now you have cloud slime! Pull and stretch the slime. It should be light, fluffy, and drizzly.
Step 21: If the slime is not as light, fluffy, and drizzly as you’d like, add 1 TSP of the wet snow and mix thoroughly into your slime. Repeat this process until it reaches your desired texture.
Step 22: Don’t forget to name your slime! Write your slime’s name on the blank label on the side of your slime jar.
Step 23: Store your slime in the provided 8 oz jar. Always keep your slime in an air-tight container when you’re not playing with it so it can last as long as possible.
Step 24: Store any extra snow in an airtight container or bag. Save and use it for your next slimey creation!
Step 25: Decorate with the provided bingsu beads and charms!
Enjoy!
xoxo
The Sloomoos